Generator Maintenance and Repair in Cuero, TX
Standby Generator Service in Cuero
The worst time to learn your generator needs service is the moment the grid drops. Standby generators sit idle for months, and idle is hard on engines. Fuel varnishes, batteries drain, rodents chew wiring, and transfer switches stick. Sutton Electric maintains and repairs standby generators in Cuero. We are an authorized Briggs & Stratton dealer, and a master electrician handles the transfer switch side that most generator techs cannot touch.
Generator Service and Transfer Switch Testing
We install whole-home backup generators, so we service them with the whole system in view: engine, controller, battery, fuel supply, transfer switch, and the panel connection. A small-engine shop can change your oil. It takes a licensed electrician to test the transfer switch under load, check the utility interlock, and catch the wiring faults that keep a healthy engine from powering the house. As a Briggs & Stratton dealer, we stock factory parts, and we service other major brands too.
What a Generator Maintenance Visit Covers
A standard service covers an oil and filter change, the air filter, and spark plugs on schedule. We run a battery load test, check coolant on liquid-cooled units, and inspect the fuel system. We run controller diagnostics and a firmware check. Then we trigger a simulated outage to exercise the transfer switch, plus a load test to confirm the unit carries the house. You get a written report: what we did, what is wearing, and what to budget for. Annual service is the floor. Dusty conditions around DeWitt County often justify twice a year.
Generator Repairs and Storm Readiness
Generator will not start. Starts, then dies. Runs while the house stays dark. Error codes on the controller. These are the calls we get the week after every storm warning, and the queue fills fast. Repairs cover starters, batteries, fuel solenoids, controllers, and the transfer switch and wiring faults that small-engine shops hand back. Hurricane season here runs June through November. Book the service visit in spring, not the day the cone shows up on the forecast.
Generator Maintenance Benefits
Generators fail quietly while the power is on, and loudly the moment it goes out.
Dealer Parts and Licensing
We are an authorized Briggs & Stratton dealer for parts and warranty work. We also hold TX master electrician license #206741 for the transfer switch and panel side.
System Load Testing
Engine service, plus a simulated outage and a load test. The unit is proven to carry your house, not assumed to.
Written Service Reports
Every visit ends with a written record: what we serviced, what is wearing, and what it costs to stay ahead of it.
Generator Service Reviews in Cuero, TX
-
Mr. Sutton was fast, reliable, and had great customer service! Will definitely continue using his services! -
He is very nice and professional. I was able to get him out to our house the same day. He is very knowledgeable and advised us of the problem. We are very happy with the service he provided. Thank you Sutton Electric!!
-
Update 10/16/24!
Charles and his team did a great job wiring our new shop. Their service was fantastic and they were easy to communicate with. Thanks again, Charles!
Charles and his guys showed up told them what was wrong and they jumped … More on all of the issues! They even fixed issues that we didn’t even know about! We will definitely be calling them back and referring them! Thank you guys!
Schedule Generator Service in Cuero, TX
Generator Maintenance FAQs
Answers to common questions about generator maintenance and repair.
Oil, filters, and plugs on schedule, plus a battery load test and fuel and coolant checks. We run controller diagnostics, a simulated-outage transfer switch test, and a load test. You get a written condition report. Plan on annual service at a minimum.
The usual causes, in order: a dead battery, stale fuel or a stuck fuel solenoid, a failed starter, or a controller fault. We diagnose at the unit and quote the actual repair, instead of swapping parts until it runs.
That points at the transfer switch or the wiring between the generator and your panel. That is licensed-electrician work. It is one of the most common faults we find on units other shops have already serviced.
Yes. We are an authorized Briggs & Stratton dealer, and we also service Generac, Kohler, Champion, and other standby brands.
Once a year at a minimum, or every 100 to 200 run hours. Units near gravel roads, ag dust, or heavy pollen often need the air filter serviced twice a year.
We diagnose under a simulated outage, then repair or replace the switch, the controller wiring, or the interlock. We finish with a full transfer test. Because it ties into your main panel, Texas requires a licensed electrician for this work.
Sutton Electric
Sutton Electric maintains and repairs standby generators in Cuero as an authorized Briggs & Stratton dealer. We cover transfer switch and panel work under TX master license #206741.